激光驱动光源 (LDLS)

EQ-99X-FC-S

EQ-99X-FC-S 是一款光纤耦合 LDLS。可提供两种类型的光纤,以选择符合用途需求的波长范围。EQ-99X-FC-S 采用紧凑型灯头结构,发热更小,非常适合在狭小空间内进行实验或在设备中安装。灯头设计为通过自然对流制冷,从而消除了制冷风扇引起的振动,并确保高度稳定的光输出。

特点

  • Extremely broad wavelength range:170 nm to 2500 nm
  • Fiber can be selected from 2 types(UV type:190 nm to 900 mn、Broadband type:350 nm to 2500 nm)
  • Long lifetime:10 000 hours
  • High radiance from a small plasma

光谱功率

详细参数

 

Parameter Description / Value Unit
Optical interface Fiber coupled output
Wavelength range*1 190 to 2500 nm
Plasma size (FWHM) Typ. 100 × 180 μm
Numerical aperture NA 0.22
Lifetime Typ. 10 000 h
Warm-up time 30 min
Laser class Class 1
Broadband optical power*2 95 mW
Output termination FC or SMA 905 mm
Cooling method No auxiliary cooling required
Nitrogen purge Recommended. Grade 4.8 or higher, filtered to 5 μm. 20 psiG ±2 psiG
Applicable standards EN 61010-1
EN 61326-1
IEC 60825-1
IEC 62471
EN 50581
Device configuration*3 Lamphead, Power supply controller, Remote control, AC adapter, Necessary cables
Power rating Input voltage (AC) 100 to 240 V
Power frequency 50 / 60 Hz
Power consumption 175 W

*1 The optical fiber should be selected according to wavelength range required for the application.

*2 Optical power from the optical fiber (UVFIBERX-230) was measured with a thermopile.

*3 The configuration is different for sales to Japan. Please contact us for details.

 

Fiber specifications

Optical fibers can be selected with the following core diameters, lengths and connector terminations.

Parameter UV type Broadband type Unit
Type UV FIBERX BB FIBERX
Recommended wavelength range 190 to 900 350 to 2500*4 nm
Broadband optical power 30 95 195 25 80 180 215 mW
Core size 115 230 455 100 200 400 600 μm
Length 1 2 1 2 1 2 1 2 1 2 1 2 1 2 m
Termination FC-FC or FC-SMA

※ The model number of each optical fiber is determined by fiber type, core diameter, length and connector termination.

Example: UVFIBERX-230-1M-FC-SMA (UV type, fiber core diameter: 230 μm, length: 1 m, connector: FC-SMA)

* The EQ-99X-FC must use the above dedicated optical fibers.

Attempting to use any other optical fibers will cause optical fiber connector problems, damage to the lamphead and will affect performance.

*4 Although light at wavelengths shorter than 350 nm also passes through the broadband type optical fiber, the fiber transmittance within that wavelength range will drop within a short time. For applications that require UV output, we strongly recommend selecting the UV type optical fiber as they are optimized for that wavelength range.

外形尺寸图(单位:mm)

Lamphead

Controller

请联系我们获取更多信息。

  • 资料索取
  • 价格咨询
  • 产品货期
  • 产品定制
  • 技术支持
  • 其他

联系我们